EZ-CO2 Climate Controller is an advanced switchbox where different devices can be connected to such as;
• Humidifier, Dehumidifier
• Heater, Airco
• CO2 Equipment
• USB stick
• Alarm system
With this controller, it is possible to control the climate in a closed environment at the desired. Temperature, Humidity and CO2 values.
Based on the selected program and the measured values, the controller switches the peripheral devices on or off, whether phased or electronically dimmed.
When devices with the appropriate capacity are connected, the controller ensures the set climate.
The EZ-TLC sensor measures:
The CO2 function is automatically calibrated daily.
This sensor will last for years without any defects and is completely maintenance free.
Optionally, a Usb stick can be connected.
The Usb stick can be read out by a computer.
The included software provides a clear understanding of all measured values and actions performed.
On the basis of these data, all the settings can be adjusted to achieve the desired climate.
By connecting an alarm system you'll be the first to know of failures and irregularities.
The controller has built in several security mechanisms that prevent
that harmful amounts of CO2 are added to the room.
The controller is equipped with a dual relay on the CO2 function.
When it detects that one relay stops working properly,
the CO2 function will be blocked.
In the menu of the ventilator settings,
up to 3 fans can be set separately from each other.
This is done in three simple steps.
In this menu is set if the Temperature and Humidity settings
gradually be bridged between LIGHT ON and LIGHT OFF periods.
Temperature and humidity are separately set.
Moreover, the addition of CO2 can be stopped before the lights go out.
In the bandwidth menu is set when the connected devices turn on and
off, on the basis of the measured temperature and humidity.The default settings will do great in most situations.
However, it is possible to adjust these settings.
The function programs of which the bandwidth is adjustable;
A safety temperature can be set between 30 °C and 60 °C
above which the controller shuts down as a precaution.
• Only the 3 fan ports remain active.
• As an additional option the port
of the cooling can be switched
on or off during this action.
During the LIGHT ON period the heater
is normally not used to heat the room.
Select ON for the heater in the LIGHT ON period
to be used, if necessary, to heat the room.
EZ-CO2 Climate Controller
- Product Code: EZ-CO2 Climate Controller
- Availability: Must be customer to view