E-PAPILLON 1000W 400V
- Espeacially developed 1000W 400V EL Double ended
- Highest PAR output in the industry, up to 2100 µmol/sec
- Driver efficiency> 95%.
- Patented open reflector design increases effiency to 95%
The luminaires of the e-papillon series are high quality products and already proved successfully in the traditional horticulture market. e-papillon luminaires are available as 600W or 1000W version. Both versions are being delivered as complete bundle including reflector, brand new EL ballast and especially developed EL lamp. Mounting brackets and junction box as well as fixing elements are also included in the delivery. Ballast and lamp are pre-installed.
The e-papillon 600W luminaire supports 220/230V systems as well as 400V. The e-papillon 1000W luminaire is only intended to use with 400V.
The e-papillon has many advantages compared with other fittings. More growth light can be produced using the same amount of energy. The fittings have a reflector with a yield of 92%, which means that the e-papillon is the most energy efficient fitting currently available.
The reflector part is also simple to remove from the fitting. The temperature of the outside of the fitting is as low as possible thanks to the reflector cover that fits over the reflector. The top of the reflector cover has a maximum temperature 50 °C, so the fitting is safe to touch and the risk of fire is minimal.
As a rule elevated temperatures and electronics are not a good combination, and therefore during the development of the e-papillon it was decided to put the electronics behind the reflector. This prevents the electronics from being exposed to radiant heat emitted by the lamp. The life span of the electronics is consequently guaranteed and you can get the greatest possible benefit from the electronic system in the fitting.
Two different versions of the e-papillon are available: the e-papillon
1000W and the e-papillon 600W. The housings of the e-papillon fittings
have been developed with the goal of optimal temperature management. You
also have all guarantees, so you can always be assured of the highest
e-papillon 1000W fittings have a 1000W Philips lamp. For this lamp, a new two-part lamp holder in collaboration with Vossloh-Schwabe in Germany has been developed .
It is impossible to touch the lamp's contact wire because of the raised socket rim. In this way the two-part lamp holder makes it safe and easy to change the lamp. The integrated switch ensures that the electrical circuit is interrupted upon opening. At the same time the contact wire is released and the lamp can be replaced without problems.
During replacement the lamp does not need to be rotated, so the chance of damaging the lamp is kept to a minimum. The lamp clips ensure that the lamp stays in place, so you have both hands free for the fasteners.
The lamp holders are made from the synthetic material Zenite reinforced with 45% glass fibre. This enables the lamp holder to withstand the high temperatures that are generated in a fitting. Zenite has the additional advantage that it emits no gases that can cause damage to the lamp and reflector.
This is how safety and functionality have been given priority in the design and manufacturing.
The patented reflectors have a yield of over 95%. This was measured in a
laboratory certified by the British Standards Institute. The reflector
of the e-papillon and the papillon fittings form the light beam in a
Research into the effect of light on plants has revealed that diffuse light gives the best results. The open reflectors provide plenty of additional light overlap so that the light penetrates deep into the plants.
Assimilation lighting is often associated with an excess of unusable heat immediately under the fitting. Hot areas can be created at the top of plants, which have a negative impact on the plants' growth and development. The heat generated at the surface of the lamp is not transferred directly to the plants, but indirectly through transport by the air in the greenhouse. By employing the open reflector concept, a natural air flow is created that ensures the heat is gradually distributed in the vicinity and prevents the creation of hot areas in the plants.
The surplus heat is therefore convected away and does not remain in the lamp. As a result the lamp stays cooler and lasts longer. Due to a completely different manufacturing process, the e-papillon can have a reflector material with a higher surface density and higher reflectivity. Also, the reflector is made in such a way that heating up of the lamp is kept to a minimum. Consequently, the lamp's light output decreases less during its lifetime. In a nutshell, the reflector delivers more light, a broader beam of light that penetrates further into plants and less illuminance decline thanks to a relatively low reflector temperature.
ePapillon 1000W 400V
- Product Code: 9994
- Availability: Must be customer to view